T5 General Purpose-Pedestal

• Capacities from 0.1 Nm to 1K Nm (0.85 to 8.85K lb-in)
• Integral mounting base
• +/- 5 VDC Output Standard (+/- 10VDC Optional)
• Digital Electronics
• Stainless Steel Shaft
• 12-28VDC Supply
• Contactless Design
• 10 kHz Sample Rate

The T5’s pedestal mount design is ideal for motor testing or anywhere a base-mounted torque sensor is required. At lower cost than the T3, the T5’s non-contact design features ± 5V or ± 10V output, 0.2% combined error, 12-bit resolution digital electronics and a remotely activated, internal shunt calibration resistor directly at the strain gage bridge. Speed and angle can be measured with the optional encoder.